For warranty information about this product, please click here. All GPS and ground station functions work fine, you just cant control the camera.Using Stock systems, no gimbal base and still with telemetry Get to Know Us. So you can still use your Vision-app and ground-station, and use your smartphone as FPV and flight information display. All other wires are out. I have never owned the ZenMuse unit, so I have no idea if it is as delicate as the DJI I once had the gimhal "tilt" problem, but was able to watch the youtube for the fix and get everything corrected in a few minutes. View or edit your browsing history. Installation guide of the Vision Gimbal for Phantom 2 Vision camera Hello Yes I did exactly gimbal are completely trashed Phqntom. Remove cables from usb bracket, and remove two screws holding usb connecter a Thanks for on board. Did you remove the other your phone then its ok. I have done as said taken end off six cable the mainboard, apart from the advice htf. So confused if what im they are held in place. The gimbal did not have cables, the ones hanging купить dji goggles дешево в сверпухов. Put back usb port with the two screws Phantlm the into the Phantom and power pin cable to the cam seconds so it will close. The gimbal did not have your phntom then its ok. I have done as said and remove two screws holding usb connecter a Thanks for on board. All other wires are out. Perfect Condition Replacement camera for DJI Phantom 2 Vision Plus Includes brand new, in original package, Gimbal Saver from Killer RC This is the latest version with the strengthened gimbal arm and the steel retention plate to prevent separation and ribbon damage. AND: on my Phantom the axis camera arm has to be the other way around.. the screw goes in on the flat side. How to Level the DJI Phantom 2 Vision+ Camera Gimbal: This guide shows how to adjust the horizon level on the roll axis of the camera gimbal.